Filter
Top Products
Printer Specifications
HP DesignJet ColorPro Series: Getting Started Guide 17
Memory 4 Mbytes on main board
Two 72-pin SIMM slots for additional memory (EDO, 60ns)
expansion up to a total of 76 Mbytes
Paper Handling Standard input capacity of 400 sheets through two trays of 150
sheet and 250 sheet capacity.
Standard output capacity of 150 sheets (face-up)
Rear Manual feed – single sheet only
Tray 1 (Input / Output Tray) – Sheets: up to 10, Cards: up to 4
Tray 2 (Upper Tray) – Sheets: up to 150, Cards: up to 60
Tray 3 (lower Tray) – Sheets: up to 250
All input paths handle standard media sizes (as listed below) up
to 13"x19" (Super A3)
Additional, Tray 1 and the rear manual feed support media sizes
as small as 4" x 6" (101.6mm x 152.4mm)
Built-in media-size sensors prevent printing on the wrong type
of media.
Paper Size Handling Minimum Width: 76.2 mm (4 in.) x 127.0 mm (6 in.)
Maximum Width: 330.2 mm (13 in.) x 482.6 mm (19 in.)
Maximum Print Width 320 mm (12.61 in.) x 470 mm (18.49 in.) on 13 in. x 19 in. media.
Recommended Media
Weight
All input paths handle the following paper weights with the rear
straight-through paper path handling up to 0.3mm thickness of
paper
Paper: 60 to 135 g/m
2
(16 to 36 lb. Bond)
Cards: 110 to 200 g/m
2
(110 lb. Index)
Straight-through path: up to 0.3 mm thickness (0.012 in.) /
220 g/m
2
(110 lb.Index)