Filter
Top Products
Step 7 – Insert Paper in Tray 3
HP DesignJet ColorPro Series: Getting Started Guide 9
8. Replace Tray 1. If Tray 2 is extended, place the Extended Tray
Cover over the tray.
9. On the Control Panel, press [Menu] until PAPER HANDLING
MENU appears.
10.Press [Item] to select TRAY 2 TYPE=
11.Press [Value] to select the media type you have loaded into the
tray and press [Select].
Step 7 – Insert Paper in Tray 3
In the online edition, click to see a video clip of the
following procedure:
1. Grasp the sides of Tray 3 and pull it out of the printer.
2. If you are loading A3-size or Tabloid-size paper, unlock the
tray lock, extend the tray and re-lock the tray.