Filter
Top Products
5 If you must replace the Control Panel Overlay, release the (2)
retaining tabs from the Control Panel and separate the
overlay from the Control Panel (see Figure 6-22, callout 1).
6 Squeeze the sides of the Control Panel Overlay to release the
(2) tabs (see Figure 6-22, callout 1).
7 Tilt the Overlay up and out.
Note
To remove the Control Panel Overlay on the
LaserJet 5 printer, first remove the Control Panel
Assembly and then slide the Overlay out of the
side of the Top Cover. Reinstalling the Control
Panel Assembly will secure the Overlay in place.
Figure 6-22 Changing the Control Panel Overlay
6-24 Removal and Replacement