Filter
Top Products
Note
Before removing the gear cover, note the routing
of the wires in the gear cover slots.
9 Remove the (2) screws from the right side gear cover (see
Figure 6-45, callouts 1 and 2). Note the wavy washer on the
(1) screw (callout 1) touching the copper contact. Remove the
cover.
10 Remove the Heat Lamp (see Figure 6-45, callout 3), from the
roller. Pull the lamp out the side of the assembly.
Figure 1-45 Fuser Gear Cap Removal
6-54 Removal and Replacement