Filter
Top Products
LaserJet 4 Plus and 5 Formatter PCA
1 Remove any MIO or SIMM modules from the Formatter
Assembly.
2 Remove the MIO Connector Support Bracket (see
Figure 6-25a, callout 2).
3 Remove the (4) I/O screws (see Figure 6-26 callout 1).
4 Remove the (2) Formatter PCA mounting screws (see
Figure 6-26 callout 2).
Note
When replacing the Formatter Assembly be sure
to re-install all SIMM modules and MIO cards.
Be sure to reset the page count and the Cold
Reset paper size after replacing the Formatter.
Figure 1-26 Interface Connector Support Screws (LaserJet 4
Plus and 5)
6-32 Removal and Replacement