Filter
Top Products
Copyright © 2000 Hewlett-Packard Co. Debugging 8-5
Ski IA-64 Simulator Reference Manual 1.0L
8.3.2 Deleting Program Breakpoints
Two commands delete program breakpoints. The bd command deletes a specified breakpoint. The bD command deletes all
breakpoints currently set.
8.3.3 Listing Program Breakpoints
The bl command causes a list of currently set program breakpoints to be displayed on the screen, symbolically if possible,
as shown in Figure 8-4. The first column of the display shows the breakpoint number, for use with the bd command. The
second column displays a “P” for physically-addressed breakpoints and “V” for virtually-addressed breakpoints. The col-
umn labelled “Address” is, of course, the breakpoint address. In the next column, “IA-64” indicates a breakpoint in IA-64
code and “IA-32” indicates a breakpoint in IA-32 code. The “Command” column is currently unused.
Figure 8-3. Three Breakpoints, 0, 2, and 1, Visible in
xski
’s Program Window