Filter
Top Products
32 Watching Television
Selecting a Video Source
• To choose from a list of sources, press Source, use the
arrows to select the source, then press OK.
• To display information about the current source, press
Info.
Using Dual Picture Mode
1. Press Menu. Use the arrow buttons to select the Source menu. Use the arrow buttons to select Dual picture
and press OK.
2. Use the arrow buttons to select Dual mode. Then use the right arrow to select PIP or Side-by-side.
3. Press the down arrow, then use the right arrow to select the source. If you are using the PIP mode, use the
arrow buttons to specify the size and layout for the second picture.
NOTE: To use dual picture mode, one of the pictures must be from the antenna or cable source. However, you
cannot view the antenna and cable sources at the same time.
To do this... Do this...
Find the active picture Use the left and right arrows on the remote control when
no border is visible
Change the size of the active picture Use the up and down arrows on the remote control
Move the border to the other picture and play its
sound
Use the left and right arrows on the remote control
Move an overlapping picture (PIP) Press Menu, then go to Source > Dual picture >
Layout
Show only the active picture (end two pictures) Press Menu, then go to Source > Dual picture >
Dual mode
Downloaded from www.Manualslib.com manuals search engine