Filter
Top Products
To set the paper type for copies from the device control panel
1. In the Copy area, press Copy Menu repeatedly until Paper Type appears.
2. Press
until the appropriate paper type appears.
3. Press START COPY Black or START COPY Color.
Refer to the following table to determine which paper type setting to choose based on
the paper loaded in the input tray.
Paper type Device control panel setting
Copier paper or letterhead Plain Paper
HP Bright White Paper Plain Paper
HP Premium Plus Photo Paper, Glossy Premium Photo
HP Premium Plus Photo Paper, Matte Premium Photo
HP Premium Plus 10 x 15 cm (4 x 6 inch) Photo Paper Premium Photo
HP Premium or Premium Plus Inkjet Transparency Film Transparency
Other transparency film Transparency
Plain Hagaki Plain Paper
Inkjet Hagaki Premium inkjet
L (Japan only) Premium Photo
2L Premium photo
NOTE: Copy functions can also be performed using the HP Photosmart Software
(Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help
for more information.
Change copy speed or quality
The device provides three options that affect copy speed and quality:
• Best (3 stars) produces the highest quality for all paper and eliminates the banding
(striping) effect that sometimes occurs in solid areas. Best copies slower than the
other quality settings.
• Normal (2 stars) delivers high-quality output and is the recommended setting for
most of your copying. Normal copies faster than Best and is the default setting.
• Fast (1 star) copies faster than the Normal setting. The text is comparable to the
quality of the Normal setting, but the graphics might be lower quality. The Fast
setting uses less ink and extends the life of your print cartridges.
To change the copy quality from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the glass.
3. In the Copy area, press Quality until the appropriate quality setting is lit.
4. Press START COPY Black or START COPY Color.
Chapter 4
38 Copy