Filter
Top Products
HP Scanjet 3000 Scanner
8
4. Align the edges of the documents by tapping the bottom of the stack against the table
top. Rotate the stack 90 degrees and repeat.
5. Load your single-side documents face down with the top of the pages pointing down.
Load your double-side documents with the 1
st
page face down and the top of the pages
pointing down.
For best results, do not drop the stack into the feeder and do not tap the top edge of the
stack after you have placed it in the document feeder.
6. Verify that the paper guides are aligned with the edges of the stack.
Load cards into the auto document feeder
To load a card into the auto document feeder, follow these steps:
1. Place the stack of cards face down with the long dimension parallel to the document
feeder.