Filter
Top Products
● The phone line sounds for outgoing faxes.
● The ring volume for incoming faxes.
To change the alarm volume
The alarm sounds when the device is presenting an alert or critical error message. The alarm
duration length is either one or three seconds, depending on the type of error.
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Common settings, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Volume settings, and then press
MENU
/
ENTER
.
4. Press
MENU
/
ENTER
to select Alarm volume.
5. Use the < or the > button to select Off, Soft, Medium, or Loud.
6. Press
MENU
/
ENTER
to save your selection.
Note
The factory-set default for the alarm volume is Soft.
To change the volume for the fax
This setting determines the volume of various fax sounds that occur when the device is
sending or receiving fax jobs.
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Common settings, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Volume settings, and then press
MENU
/
ENTER
.
4. Use the < or the > button to select PhoneLine Volume, and then press
MENU
/
ENTER
.
5. Use the < or the > button to select Off, Soft, Medium, or Loud.
6. Press
MENU
/
ENTER
to save your selection.
Note
The factory-set default is Soft.
To change the ring volume of the fax
The fax ring sounds when the device is initially sending or receiving a call. The ring duration
length depends on the local telecom ring-pattern length.
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Common settings, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Volume settings, and then press
MENU
/
ENTER
.
4. Press the < or the > button once to select Ring volume, and then press
MENU
/
ENTER
.
5. Use the < or the > button to select Off, Soft, Medium, or Loud.
6. Press
MENU
/
ENTER
to save your selection.
Note
The factory-set default is Soft.
ENWW Using the device control panel 15