Filter
Top Products
52 Print media specifications
Adhesive labels
The table below summarizes the adhesive label specifications that
provide the best performance.
Note The specifications listed in this section generally apply to all HP
LaserJet printers but check the user documentation that came with your
printer for product specific information.
CAUTION Not all HP Color LaserJet printer support printing on labels. Please
refer to your user guide to determine if your printer supports labels.
Property Specifications
Adhesive Must not be on any external surfaces of the label before, during,
or after printing. Label construction, adhesive release strength,
and die-cutting must not allow labels to peel of during printing.
Caliper Must not exceed 0.23 mm (9.0 mils).
Fusing compatibility All inks, adhesives, and other materials used in the label
construction must be compatible with the heat and pressure of
the fusing process. Materials must not scorch, melt, ignite, offset
materials, or release undesirable emissions when heated to
205° C (401° F) for 0.1 second (0.2 second for HP Color LaserJet
printers).
Packaging Moisture-proof wrap to preserve properties.
Shelf life One year minimum, stored at 23° C (73° F) and 50% RH.