Filter
Top Products
12
HP Netserver High Density Rack Solutions Overview (LP 2000r)
HP Rack Accessories
In addition to the rack itself, HP offers numerous accessories to increase the convenience and safety of
having your servers installed in a rack.
Front doors, side panels and tie kits
Each HP Rack System/E racks include a perforated, lockable rear door. In addition optional side panels
and a front door can be chosen as your needs demand.
All the three available front doors—different only by their heights—offer 63% per-
foration so that the equipment mounted in the rack can be clearly seen through the
door. Also, the large perforations allow for optimum ventilation.
The doors can be mounted to open either to the left or to the right and come com-
plete with all the mounting hardware. The quick-disconnect hinges allow the door
to be easily lifted off without tools but prohibit it to be removed when the door is
locked. A torx 25 driver is the only tool required for installation of hinges.
For Use with HP Rack Model Number HP Front Door Product Number
HP Rack System/E41 (J1500A) J1509A
HP Rack System/E33 (J1501A) J1510A
HP Rack System/E25 (J1502A) J1511A
To cover the sides of the racks - whether for protection or appearance—HP provides kits consisting of
enough PC-ABS injection molded plastic snap-in side panels to cover both sides of the racks. Because they
can be removed and installed easily without tools, access to the equipment inside is always effortless and
convenient.
For Use with HP Rack Model Number Content HP Side Panel Kit
Model Number
HP Rack System/E41 (J1500A) 2 each 9U side panels J1506A
8 each 8U side panels
HP Rack System/E33 (J1501A) 2 each 9U side panels J1507A
6 each 8U side panels
HP Rack System/E25 (J1502A) 2 each 9U side panels J1508A
4 each 9U side panels
In some systems with multiple servers, you may decide to install peripherals and
additional equipment in a second, or even third, rack. In such instances, the HP Tie
Kits allow you to add lateral stability by mechanically connecting the racks.
There are two kits to choose from per the following table. The kits include fasteners
to tie the racks together at the top and the bottom (both front and rear) as well as
cosmetic covers.
This hardware has been designed so that you can tie the racks together after the
servers and/or other equipment have already been installed. There is no need to turn
off the power to the system.