Filter
Top Products
User’s Guide 53
5
Installing Permanently
This chapter explains how to permanently install the digital projector.
Installing the Projector
This section provides instructions on how to permanently install the projector.
■ “To mount the projector on a tripod” on page 53
■ “To install on a table” on page 54
■ “To install on the ceiling” on page 55
■ “To install for rear projection” on page 56
■ “To lock the projector” on page 57
To mount the projector on a tripod
The projector includes standard tripod mount on the bottom of the projector. This
allows the projector to be mounted on tripods readily available at camera and other
electronic stores.
Ä
CAUTION:
■ The tripod should be capable of supporting a weight of at least 5 lb. Refer to the
owner’s manual that came with your tripod for more information.
■ Do not overtighten the tripod mount screw. Doing so could strip the screw and
cause the projector to fall off the tripod.
1. If necessary, remove the tripod mounting block from the tripod.
2. If there is a guide pin on the tripod mounting block, align it with the guide pin
hole on the bottom of the projector.