User’s Guide 75
Reference
Safety Information
Safety precautions
Å
WARNING: Observe the following precautions to reduce the risk of injury.
■
To prevent eye injury, do not look directly into the lens when the lamp is on. Do
not point the laser light into anyone’s eyes.
■ To prevent electrical shock, do not expose the projector to rain or moisture. Do not
open the projector except as instructed by the manual.
■ To reduce the risk of fire or electrical shock, do not allow small metallic objects to
get inside the projector. Carry the projector only in its protective case, and do not
store paper clips or other small objects inside the case.
■ Allow the projector to cool before removing any cover and touching internal
components, as instructed by the manual.
■ Keep paper and other combustible material away from the projector lens to
prevent the possibility of fire.
■ Use only an approved power cord rated for the voltage and current marked on the
product label. Do not overload any outlet or extension cord.
Laser safety
The laser pointer on the remote control is certified as Class 2 laser device according to
the U.S. Department of Health and Human Services Radiation Performance Standard
and International Standards IEC 825/IEC 825-1 (EN60825/EN60825-1). This device
is not considered harmful, but the following precautions are recommended:
■ Ensure proper use by reading and following the instructions carefully.
■ If the unit requires service, contact an authorized HP service center.
■ Do not attempt to make any adjustment to the unit.
■ Avoid direct exposure to the laser beam.