Filter
Top Products
Troubleshooting
100
8
❖ Alert Messages (in alphabetical order)
Messages Descriptions and recommended actions
Hardware Problem Wireless Board Accessing to the IEEE 802.11b board was pos-
sible, but an error has been detected. Check
that the board is installed properly.
Hardware Problem Wireless Card IEEE 802.11b card access successful, but an er-
ror was detected. Check that the card is in-
stalled properly.
Hardware Problem LCT There is a problem with the paper transfer mo-
tor of Large Capacity Tray. Turn the main
switch off then on. If the problem does not
solve, contact your sales/service representa-
tives.
Hardware Problem Tray 1 (or greater number) There is a problem with the paper transfer mo-
tor of paper tray 1 (or greater number). Turn
the main switch off then on. If the problem
does not solve, contact your sales/service rep-
resentatives.
Low Toner remaining The printer is almost out of toner. Prepare a
new toner cartridge.
Remove Paper Standard Tray The standard output tray is full. Remove the
paper from the standard output tray.
Remove Paper Finisher Tray 1 The finisher tray 1 is full. Remove paper from
the finisher tray 1.
Remove Paper Finisher Tray 2 The finisher tray 2 is full. Remove paper from
the finisher tray 2.