Filter
Top Products
maintain your hp psc
30
hp psc 2100 series
set the power save time
The bulb in your HP PSC remains on for a specified period so that the unit
is immediately ready to respond to your request. When the HP PSC has not
been used within that specified period, it turns the bulb off to preserve power
and displays Power Save On in the front-panel display. (You can exit this
mode by pressing any button on the front panel.)
Your unit is automatically set to enter power-save mode after 12 hours.
Follow these steps if you want the HP PSC to enter this mode earlier.
1 Press Setup until Maintenance appears, and then press Enter.
2 Press until Power Save Time appears, and then press Enter.
3 Press until the desired time appears, then press Enter.
set scroll speed
The Scroll Speed option lets you control the rate that text messages appear
in the front-panel display. You can choose Normal, Fast, or Slow.
1 Press Setup until Maintenance appears, and then press Enter.
2 Press until Scroll Speed appears, and then press Enter.
3 Press until the desired speed appears, then press Enter.
set the prompt delay time
The Prompt Delay option lets you control the amount of time before a
message is displayed in the front-panel display. You can choose Normal,
Fast, or Slow.
1 Press Setup until Maintenance appears, and then press Enter.
2 Press until Prompt Delay appears, and then press Enter.
3 Press until the delay time appears, then press Enter.