Filter
Top Products
additional setup information
36
hp psc 2100 series
connect your hp psc to your computer
Your HP PSC supports HOT Swapping, meaning you can connect to the
HP PSC while the power is on at your computer and on the HP PSC.
connect your usb
port
Connecting to your HP PSC with USB is straightforward. Simply plug one
end of the USB cable into the back of your computer and the other in the
back of the HP PSC.
connecting to the USB port on your computer
connect your
hp psc to more
than one
computer
You can connect more than one computer to your HP PSC by using a
powered hub. Both computers must have the HP PSC software installed.
Connect each computer to the hub, then connect the hub to the HP PSC.
If you want to connect more than one computer to your HP PSC in a
networked environment, you can do so using an HP JetDirect 175x and USB
(Windows and Macintosh), but only print functionality will be available for
the HP PSC.
what works what does not work
Plugging into the USB port on your
computer
Plugging into the USB port located
on the keyboard
Plugging into a powered hub that is
connected to the USB port on your
computer
Plugging into a non-powered USB
hub
AppleTalk is not supported.