Filter
Top Products
5. Click OK again to confirm.
6. On the HP 3PAR StoreServ Storage, issue the HP 3PAR OS CLI sethost command with the
initchap parameter to set the CHAP secret for the ESX host.
# sethost initchap -f host_secret3 ESX1
NOTE: If mutual CHAP on ESX is being configured, then target CHAP will need to be
configured on the HP 3PAR StoreServ Storage as well as initiator CHAP. Set target CHAP
secret using the HP 3PAR OS CLI sethost command with the targetchap parameter.
# sethost targetchap -f host_secret3 ESX1
a. For the target CHAP, make sure to give the storage system name as the Name field
variable. The storage name is obtained using the showsys output, as shown below.
b. For ESX 4.x and 5.x:
24 Configuring the HP 3PAR StoreServ Storage for iSCSI