Filter
Top Products
2. Press Ctrl+S to enter the utility.
Figure 4 iSCSI Utility
3. Select a controller and press Enter.
4. From the Controller Configuration screen, select Network Configuration and press Enter.
5. In the Network Configuration screen, select Configure Static IP Address and press Enter. The
screen for setting a static IP address displays.
Figure 5 Setting a Static IP Address
6. After entering the IP address, subnet mask, and default gateway, click Save to return to the
Controller Configuration menu.
If the configuration being set up will be booted from SAN rather than from the host, follow these
steps.
26 Configuring the HP 3PAR StoreServ Storage for iSCSI