Filter
Top Products
HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–23
Setting Up and Using Your System
security/password menu
You can set administrator and user passwords to provide different
levels of access to the system firmware:
■ The Administrator can access and change all settings in the EFI
Boot Manager program and can run the EFI shell.
■ The User can access basic functions in the EFI Boot Manager.
NOTE: These are not OS passwords. These passwords limit access to
the firmware interface only. For information on setting OS passwords,
see your OS user guide.
To add, change or delete passwords:
1. Select
Security/Password Menu.
2. Select either:
❏ Set Administrator Options
❏ Set User Options
3. Select:
❏ Set Administrator Password or Set User Password to
set a new password.
❏ Enable/disable Password to specify whether a password
is required.
❏ Help for assistance.
4. When you are finished, select Exit.
lp0103gs.book Page 23 Tuesday, June 8, 2004 4:42 PM