Filter
Top Products
User’s Guide 2–2
Synchronizing with Your Computer
To install Microsoft ActiveSync on your computer:
1. Insert the Companion CD into the CD-ROM tray or slot in
your computer.
2. After the introduction displays, click Start Here. Follow the
Setup Wizard screen instructions.
When prompted, connect your HP iPAQ and your personal
computer using the supplied cables in the following manner:
1. Insert the round connector on the AC Adapter cable into the
connector on the sync cable.
2. Insert the connector on the sync cable into the connector on
the bottom of the HP iPAQ.
3. Connect the AC Adapter cable into a standard electrical
outlet.
Note: Do not connect the sync cable to the computer yet.
4. When instructed by Setup Wizard, connect the HP iPAQ to
the computer by inserting the USB plug on the sync cable
into a USB port on your computer.