Filter
Top Products
Removal and replacement procedures 63
3.
Align the hole on the BBWC assembly to its corresponding hole on the server tray.
4. Meanwhile, fasten the screw that secures the BBWC assembly to the server tray.
Figure 52 Reinstalling the BBWC Assembly
System board removal and replacement procedure
To remove the system board:
Remove the tray with the system board:
1. Press the tray latch to release the tray handle.
2. Rotate the tray handle to disengage the power connector.
3. Pull the tray assembly out of the chassis.
Figure 53 Removing the Tray with System Board