Filter
Top Products
Diagnostic tools and setup utilities 90
Exit menu
Figure 82 Exit Menu of the BIOS Setup Utility
Use this menu to save changes or discard changes. When you save and exit, the server reboots.
• Save Changes and Exit—Save the changes you have made and exit the BIOS Setup Utility.
• Discard Changes and Exit—Exit the BIOS Setup Utility without saving the changes you have
made.
• Discard Changes—Discard (cancel) any changes you have made. F10 can be used for this
operation. You will remain in the Setup Utility.
• Restore Default Settings—Load optimal default values for all the setup questions.
BIOS update
Please make sure your USB key drive diskette is bootable before unzip.
Please unzip factory or user into the root directory of USB key drive diskette.
Flash system BIOS steps:
1. Power on the system with USB key drive diskette.
2. Factory Tool - Execute the autoexec.bat
User Tool - Execute the ROMPAQ.EXE
3. Follow the on-screen instruction to upgrade the system BIOS.
Power- on Sel f-Test ( POST )
When the server boots up, a series of tests are displayed on the screen. This is referred to as Power-
On Self-Test (POST). POST is a series of diagnostic tests that checks firmware and assemblies to
ensure that the server is properly functioning. This diagnostic function automatically runs each time the
server is powered on.