Filter
Top Products
Troubleshooting
Maintenance and Service Guide 2–3
Computer Setup Defaults
To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
notebook. Press
F10 while the “Press <F10> to enter Setup”
message is displayed in the lower-left corner of the screen.
❏ To change the language, use the arrow keys to select the
Advanced menu, select Language Support, and then
press
F5 or F6 until the appropriate language is
highlighted. Press
F10 to save your selection and exit the
Advanced menu.
❏ To view navigation information, press F1.
2. Use the arrow keys to select Exit > Load Setup Defaults.
3. Press
F9.
4. Press enter to confirm the return to default configuration.
5. To confirm the restoration, press
F10.
6. Select Exit > Exit Saving Changes, and then follow the
instructions on the screen.
When the computer restarts, the factory settings are restored, and
any identification information you have entered is saved.