Filter
Top Products
Setting up the projector 19
Connecting power
1. Place the projector on a stable platform located 1 to 10 m (3 to 33 ft) in front of the screen.
Ideally, the platform should be lower than the bottom of the screen.
2. Connect one end of the power cord to the back of the projector 1 and the other end to a
grounded electrical outlet 2.
3. Turn on the main disconnect switch
3 on the back of the projector.
If you want to permanently install the projector on the ceiling or behind the screen, see
“Installing the projector” on page 49.