Reference68
Safety information
LED safety
The infrared ports located on the digital projector and remote control are classified as Class 1
LED devices according to International Standard IEC 825-1 (EN60825-1). This device is not
considered harmful, but the following precautions are recommended:
• If the unit requires service, contact an authorized HP service center.
• Do not attempt to make any adjustment to the unit.
• Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is invisible
light and cannot be seen.
• Do not attempt to view the infrared LED beam with any type of optical device.
Mercury safety
WARNING! This digital projector lamp contains a small amount of mercury. If the lamp
breaks, adequately ventilate the area where the breakage occurred. Disposal of the lamp
might be regulated due to environmental considerations. For disposal or recycling information,
contact your local authorities or the Electronic Industries Alliance at http://www.eiae.org.
640 × 480 60, 72, 75, 85
720 × 400 70, 85
SVGA 800 × 600 56, 60, 72, 75, 85
XGA 1024 × 768 60, 70, 75
SXGA 1280 × 1024 60, 75
SXGA+ 1400 × 1050 60
Video mode compatibility (continued)
Compatibility Resolution Refresh rates (Hz)