Installing Permanently54
• Command that is currently unavailable—command with “?” added
• Invalid parameter—command with current value
• Action command with unnecessary parameter—action command
• Action command that is unavailable—action command
The following simplified example shows how the projector typically responds to a request to
change the active input source. Note that the three latter notifications are delayed.
Room controller commands
In the following tables, if the parameter listing for a particular command is “None,” that
command requires no parameter. Some commands are valid only when the projector is turned
on, STAT=1. Some commands are available only when specific input sources are active.
Request: *RSRC=4<CR>
Notification: *RSRC=4<CR><LF> (acknowledges request)
*SRC=0<CR><LF> (projector is attempting to acquire source 4, and in the interim
has no valid source)
*SRC=4<CR><LF> (source 4 is now active)
*BRT=60<CR><LF> (brightness has been modified for source 4)
*CSPC=?<CR><LF> (color space is not supported for this input)
Source function
Command Parameters Description
SRC ? Queries the current active input source: 0=no active
source,1=VGA-in, 3=composite video, 4=S-video, 8=DVI.
RSRC 1, 3, 4, 8, ? Attempts to use the specified source as the active input source,
or queries the last source requested: 1=VGA-in, 3=composite
video, 4=S-video, 8=DVI.
NXT None Switches to the next input source.
AUTO 0, 1, ? Sets or queries automatic searching inputs for signal: 0=no
searching, 1=searching.