Filter
Top Products
5-8
PCI Card Installation
Hardware Installation
10 Slide the PCI module into the VMEbus chassis, as shown in Figure 5-5,
and tighten its handle screws.
Figure 5-5 Installing the PCI Module into the VMEbus Chassis
11 Plug in the power cord, and then turn on the power for the VMEbus chas-
sis and boot the operating system.
12 Log in as root and use the SAM utility to configure the HP-UX kernel for
PCI support.
13 When SAM has started, choose the Kernel Configuration ->
menu.
14 From the Kernel Configuration menu, choose Drivers