Filter
Top Products
6-8
Installing and Configuring Mass Storage Devices
Installing Mass Storage Devices
Figure 6-2 Device Installation in the Mass Storage Module
8 Tighten the mounting screws.
9 Replace the individual SCSI and power connectors.
10 Replace the mass-storage module in the Model 748i.
11 Tighten the captive screws for the mass storage module.
12 Reconnect the external SCSI cable.
13 Reconnect the power cables.
14 Turn on the Model 748i and stop the boot process at the prompt by press-
ing Esc
.