Filter
Top Products
When a new host group is added, additional host group modes (options) may be configured. The
storage administrator must verify if an additional host group mode is required for the host group.
The following host group modes are available for Windows 2000/2003:
Host
Group
Mode Function Default Comments
2
(Windows
2003 only)
VERITAS DBE+RAC Database
Edition/Advanced Cluster for Real
Application Clusters or VERITAS® Cluster
Server 4.0 with I/O fencing is used.
Inactive
6
Parameter Setting Failure for TPRLO
When using the Emulex HBA in the
Windows environment, the parameter
setting for TPRLO failed. After receiving
TPRLO and FC P_CMD, respectively. PRLO
will respond when HostMode=0x0C/0x2C
and HostModeOption=0x06. (MAIN
Ver.50-03-14-00/00 an d later)
Inactiv
e
CAUTION:
Changing host group modes for ports where servers are already installed and configured i s d isruptive
and requires the server to be rebooted.
Setting the System Option Mode
The HP service representative sets the System Option Mode(s) based on the operating system and
software configuration of the host.
14
Installation