Filter
Top Products
1 Setting Up and Using Your PC Workstation
Starting and Stopping Your PC Workstation
12 English
When you switch on the computer, it carries out the Power-On-Self-
Test (POST) while the PC Workstation’s logo is displayed. If you
wish to view the POST details, press to get the HP Summary
Screen. If there is an error in the POST, the error will automatically
be displayed. For details, refer to “If a POST Error Message is
Displayed” on page 61.
3 If you have set a password in the PC Workstation’s Setup program,
the password prompt displays after the POST has completed. If the
Password prompt is displayed, type your password and press
to be able to use the PC Workstation.
Stopping Your PC Workstation
To stop the PC Workstation, make sure that you have exited all
programs and the operating system (if necessary), and then press the
power button on the control panel.
crystal.bk : cryst-1.fb4 Page 12 Monday, March 23, 1998 4:09 AM