Filter
Top Products
English 35
2 How to Install Accessories Inside Your PC Workstation
Installing Memory
4 Replace the video adapter in the computer. Carefully slide the board
back into its accessory slot. Firmly press the board into the socket.
Make sure that the board slides into the socket completely and does
not touch components on other boards. Secure the video adapter.
5 Install any other accessories before replacing the cover (see
page 27). Reconnect all cables and power cords.
Completing the Video
Memory Installation
Procedure
1 Switch on the PC Workstation.
2 Check the HP Summary Screen to verify the new configuration
(refer to "The HP Summary Screen and Setup Program", on page
101).
NOTE If you need to use a special video driver for your application, you may
be asked to insert the CD-ROM or diskette containing the driver.
Video Adapter
Accessories Available
from Other Sources
Additional accessories, including memory upgrades and a video
MPEG module, are available for your video adapter. However, these
accessories cannot be ordered from HP. Contact your dealer for more
details about these accessories.
For XW Models with
HP Visualize FX4
To add a texture module to the HP Visualize FX4, refer to the Texture
Module Accessory User’s Guide shipped with this accessory.
crystal.bk : cryst-2.fb4 Page 35 Monday, March 23, 1998 4:09 AM