Filter
Top Products
2 How to Install Accessories Inside Your PC Workstation
Installing Memory
32 English
4 Remove the fan connection to the system board and lift the airflow
guide completely out of PC Workstation’s case.
5 Remove the Ultra wide 16-bit SCSI cable from the system board.
6 Remove the power supply and the transparent airflow guide covering
the processor sockets (if needed).
7 Remove the floppy disk drive data cable from the system board.
8 The location of the memory module slots is shown here.
crystal.bk : cryst-2.fb4 Page 32 Monday, March 23, 1998 4:09 AM