Filter
Top Products
8
• Generally, better quality of a picture is available when the lens shift is set
to the center.
• Do not attach anything other than specified options (such as an optional conversion
lens) to the screw thread. For details, please ask your dealer.
NOTE
Adjusting The Projector's Elevator
Using The Picture Shift Dials
CAUTION •
If you press the elevator buttons without holding the projector, the
projector might crash down, overturn, smash your fingers and possibly result in
malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD
THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set
the projector is uneven or if you otherwise need to adjust the angle of projection. The
adjustment range of the elevator feet is 0 to 9 degrees.
The lens of this projector can be shifted horizontally and vertically. When you want to
finely adjust the picture position, use the picture shift dials.
Using the horizontal picture shift dial shifts the picture to right or left.
Using the vertical picture shift dial shifts the picture upward or downward.
1
Press and hold in the elevator buttons.
2
Raise or lower the projector to the
desired height and then release the
elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
3
As necessary, you can also finely
adjust the height of the projector by
twisting the elevator feet by hand.
Elevator buttons
Elevator feet
Setting Up (continued)
Horizontal picture shift dial
7.5:2.5
to
2.5:7.5
10:0
to
0:10
Vertical picture shift dial