Filter
Top Products
40
Wired LAN
Subnet mask *1: 255.255.255.128
(example)
2) Click [Connect].
3) The network connection will be established.
Proceed to the item 3.6 Conrm the
connection to your destination. (50)
1) Enter the following information for the
projector.
3.4 Passcode connection (continued)
3. Using the Live Mode
*1 In case the case you use the Subnet mask except Class A/B/C, the screen is
appeared. Please set the Subnet mask.
• If you require the network setting information on the projector, take
the following procedure to nd it out.
1) Turn on the projector, and make sure that the projector image is on screen.
2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on
the projector to show the menu on screen.
3) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ►
cursor button to enter the item.
4) Use the ▲/▼ cursor buttons to select the MIU, and use the ► cursor button
to enter the item.
5) Use the ▲/▼ cursor buttons to select the INFORMATION, and push the ►
cursor button.
6) The setting will be displayed in the MIU-INFORMATION box.
NOTE