Hitachi CP-X2 Projector User Manual


  Open as PDF
of 119
 
41
3.5 Manual conguration
There are 3 options for the manual
conguration.
• Prole
• History
• Congure Network Settings Manually
• To check the setting in a prole data, follow the process below.
1) Choose a prole data that you want to check.
2) Move the mouse cursor to the prole data, and click the right button on the
mouse to display a pop-up menu.
3) Select the “Property” in the pop-up menu, and click the left button on the
mouse.
4) The setting information of the selected prole data is shown.
• If the DHCP is set on in the projector, the network connection between the
projector and PC may not be established since IP address may be varied. If
you like to use the Prole connection, set the DHCP off in the projector.
NOTE
Selecting a prole data connect the network
with the projector.
It is required to store the prole data in
advance. (60)
1) Select [Prole].
2) Choose a prole data listed in the window.
3) Click [Connect].
4) The network connection will be established.
Proceed to the item 3.6 Conrm the
connection to your destination. (50)
3.5.1 Prole connection
3. Using the Live Mode
 previous next