Filter
Top Products
Connect VX6 to an Integrated Mount UPS Battery Pack
A. Vehicle Battery
B. Vehicle Power Connection Cable
C. UPS Battery Pack
D. VX6 Computer
1. Connect the power cable to the vehicle’s electrical system as described in Connect Vehicle 12-80VDC Connection.
2. Connect the power cable to the UPS battery pack by aligning the water-tight connector pins to the input connector
(labeled “From Vehicle”); push down on the water-tight connector and twist it to fasten securely.
3. Connect the output cable (labeled “To Computer”) from the UPS battery pack to the power connector on the bottom of
the VX6 by aligning the water-tight connector to the power connector; push down on the water-tight connector and twist
it to fasten securely.
4. Turn the VX6 on.
3-8