Filter
Top Products
3 - 21
Resetting the Custom Defaults: All Application Work Groups
If you want the custom default settings restored to all of the work groups, scan the Custom Product Default Settings bar code
below. (If there are no custom defaults, it will reset the work groups to the factory defaults.) See "Setting Custom Defaults" on
page 1-7 for further information about custom defaults.
Note: Scanning this bar code also causes both the scanner and the base or Access Point to perform a reset and become
unlinked. The scanner must be placed in its base, or the Access Point linking bar code must be scanned to re-establish
the link. Refer to Scanner Modes, page 3-9 for additional information.
If your scanner is in multiple scanner mode, you will hear up to 30 seconds of beeping while all scanners are relinked to
the base or Access Point and the settings are changed.
Using the Scanner with Bluetooth Devices
The scanner can be used either with the charge base, an Access Point, or with other Bluetooth devices. Those devices include
personal computers, laptops, PDAs, and Honeywell mobility systems devices.
Bluetooth HID Keyboard Connect
Your scanner can be paired with Bluetooth-capable devices, such as iPads, smart phones, and laptops, so that scanned
data appears on your device screen as though it was entered on the keyboard. In order to pair with the Bluetooth device:
1. Scan the Bluetooth HID Keyboard Connect bar code below.
2. Set the Bluetooth-capable host device so it searches for other Bluetooth devices. (Refer to your device’s User’s Guide
for pairing instructions.)
3. Once your host device has located the scanner, select the scanner name. The host generates and displays a random
PIN that must be scanned within 60 seconds. You must quickly scan Bluetooth PIN Code, then the numbers below,
then Save.
Custom Default Settings:
All Work Groups
Bluetooth HID Keyboard
Connect
Bluetooth PIN Code
0
1