Filter
Top Products
INSTALLATION
EAS Deactivation
SW1 and SW2 are the switch banks inside the Checkpoint Device that set the
deactivation range. The following is a list of Checkpoint recommended switch
bank settings.
Checkpoint Recommended Switch Bank Settings
SW1
SW2
RS232, Keyboard Wedge, & RS485
Switch 5
ON
Switch 5
ON
Switch 1, 2, 3, 4 & 6
OFF
Switch 1, 2, 3, 4 & 6
OFF
USB
Switch 2 & 3
ON
Switch 2 & 3
ON
Switch 1, 4, 5 & 6
OFF
Switch 1, 4, 5 & 6
OFF
All OrbitCG models are equipped with EAS capabilities. OrbitCG’s optional EAS
cable is equipped with additional wires for connection to a Checkpoint Device.
Figure 14. EAS Cable
Figure 15 shows the location of the EAS
deactivation area for OrbitCG.
It is important to pass the entire tag through
this area to deactivate the security tag.
Figure 15. EAS Deactivation Area
12