Filter
Top Products
Total Connect Online Help Guide
– 5 –
Settings for QuickTime Player
If you do not already have QuickTime Player installed please download and install it.
http://www.apple.com/quicktime/download/
After the installation is completed and the PC has been rebooted, configure the player as follows:
1. Open the player. Typically navigate Start > Programs > QuickTime > QuickTime Player.
2. From the Edit pull-down menu, navigate Preferences > QuickTime Preferences. The Preferences window
appears.
3. Select the Advanced tab. Then using the Transport Setup
drop-down box, select Custom.
4. Ensure the Transport Protocol
is set to HTTP, and the Port ID is set to 80.
5. Click OK, then click Apply. Click OK to close.