Filter
Top Products
3 - 7
Back Panel Features for the 9700
Battery Door
The battery door secures the Li-ion battery pack in the terminal’s battery well. For more
information, see Batteries on page 3-12.
Color Camera
The 2.0-Megapixels Resolution (1600 x 1200 pixel) color camera provides easy piture capture
with Automated Camera Control (ACC). Additional features include automated picture profiles
and an Application Programming Interface (API).
Fastener for the Stylus Tether
Stylus tethers can be purchased separately to help prevent accidental loss when the stylus is
not stored in the stylus slot. A stylus tether is a coiled, elastic cord that tethers the stylus to
the terminal. Secure one end of the cord to the back panel of the terminal and the other end
to the stylus.
Flashlight/Camera Flash
The flashlight/camera flash is located on the back panel of the terminal. When used as a
Flashlight, press the Blue key + SCAN key to turn the flashlight on or off. When used as a
Camera Flash with the terminal’s color camera, the flash is controlled by the camera
application.
Hand Strap
The 9700 comes with a removable, elastic hand strap. The hand strap includes a stylus holder
that accommodates a variety of stylus sizes.
Image/Scan Engine Window
The available image engines read and decode linear, stacked linear (e.g., PDF417), and 2D
matrix bar code symbologies. The available image engines contain a laser aimer for greater
accuracy. The laser apertures for the imaging engines’ laser aimers are contained behind this
window. For more details, see Using the Scan Image Engine on page 4-1.
Memory Card Socket and SIM Card Socket
The memory card socket provides the user with the option to expand the terminal’s memory
capacity using industry-standard microSD or microSDHC memory interfaces. The expansion
socket is located under the main battery in the battery well.
When the battery pack and battery door are properly installed, the memory card is sealed
against moisture and particle intrusion, read/write data is stored securely, and the terminal’s
environmental rating is preserved; see Installing a Memory Card on page 3-9.
The card socket for the Subscriber Identity Module (SIM) is also located under the main battery
in the battery well. See SIM Card Installation and SIM Card Requirements, on page 9-2 for
additional information.
Rear Speaker
The integrated rear speaker sounds audio signals as you scan bar code labels and enter data.
The integrated speaker also supports playback of wave and MP3 files, software mixer, and
Speakerphone for WWAN/GSM audio and VoIP. The operating frequency range is
600-3000Hz at >90dB.