Filter
Top Products
Chapter 2
Advanced Configuration
15
EtherFast Cable/DSL Router with 4-Port Switch
Destination URL/IP, and Service/Port Number for each site
are listed. Click Refresh to update the log.
View Log Click this button to view a log of all activities
and to access a drop-down menu of various logs to view.
On the All screen, select the log you wish to view: All,
System Log, or Access Log.
Log > View Log
All • You see a log of all activities, a combination of the
System and Access Logs.
System Log • This log displays a list of cold and warm
starts, web login successes and failures, and packet
filtering policies.
Access Log • This log shows all data traffic.
Click Clear to clear a log. Click Refresh to update a
log.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Administration > Factory Defaults
The Administration > Factory Defaults screen allows you
to restore the Router’s configuration to its factory default
settings.
Administration > Factory Defaults
NOTE: Do not restore the factory defaults unless
you are having difficulties with the Router and
have exhausted all other troubleshooting
measures. Once the Router is reset, you will have
to re-enter all of your configuration settings.
Factory Defaults
Restore Factory Defaults To reset the Router’s settings
to the default values, select Yes and click Save Settings.
Then follow the on-screen instructions. Any settings you
have saved will be lost when the default settings are
restored.
Administration > Firmware Upgrade
The Firmware Upgrade screen allows you to upgrade the
Router’s firmware. Do not upgrade the firmware unless
you are experiencing problems with the Router or the new
firmware has a feature you want to use.
Administration > Firmware Upgrade
NOTE: The Router may lose the settings you
have customized. Before you upgrade its
firmware, write down all of your custom settings.
After you upgrade its firmware, you will have to
re-enter all of your configuration settings.
Upgrade Firmware
Before upgrading the firmware, download the Router’s
firmware upgrade file from the Linksys website,
www.linksys.com. Then extract the file.
Please select a file to upgrade Click Browse and select
the extracted firmware upgrade file.
Upgrade After you have selected the appropriate file,
click this button, and f
ollow the on-screen instructions.