Filter
Top Products
Chapter 2
Advanced Configuration
16
EtherFast Cable/DSL Router with 4-Port Switch
Status > Router
The Router screen displays information about the Router
and its current settings.
Status > Router
Information
Firmware Version This is the version number of the
Router’s current firmware.
MAC Address This is the Router’s MAC address, as seen
by your ISP.
Status
This section shows the current network information
stored in the Router. The information varies depending on
the Internet connection type selected on the Basic Setup
screen.
Click Refresh to update the on-screen information.
Status > Local Network
The Local Network screen displays information about the
local, wired network.
Status > Local Network
Local Network
Local MAC Address The MAC address of the Router’s
local, wired interface is displayed here.
IP Address This shows the Router’s IP address, as it
appears on your local network.
Subnet Mask This shows the subnet mask of the Router.
DHCP Server The status of the Router’s DHCP server
function is displayed here.
DHCP Clients Table Click this button to view a list of PCs
that are using the Router as a DHCP server.
DHCP Clients Table
DHCP Client Table
The DHCP Client Table lists computers and other
devices that have been assigned IP addresses by the
Router. The DHCP Server IP Address is the IP address
of the Router. The table lists the Client Hostname, IP
Address, MAC Address, and Interface for each DHCP
client. To remove a DHCP client, select the client
and click Delete. To retrieve the most up-to-date
information, click Refresh.
Click Refresh to update the on-screen information.