Filter
Top Products
Typical Wayport Unit
Typical Wayport Connections
Linksys BEFSR41 Cable/DSL Router with/4
-
port switch or equal.
Furnished by owner/operator or others. This item is not
furnished by Honeywell and does not come with the Wayport
Unit. The installer must purchase locally. Configure router
from Basic Setup as incoming “Obtain an IP Automatically”.
Change “Local IP Address” to the following: 192.168.100.1 and
leave Subnet Mask at the following: 255.255.255.0. Or change
to 255.255.255.252. Configure router to port forward ports 80,
1911 and 3011. Refer to attached router manual for
adjustments and settings.
WE
Bs Unit inside HEMS II Panel
Configure WEBs unit
Change Port #1 as follows:
IP Address = 192.168.100.10
Subnet Mask = 255.255.255.0
Or 255.255.255.252
Gateway = 192.168.100.1
Port #2 configured to communicate with Touch Screen PC on
HEMS II panel face. Do not change settings.