Filter
Top Products
26
INSTALLATION
EAS DEACTIVATION
SW1 and SW2 are the switch banks inside the Checkpoint device that set the deactivation range. The following is a list of Checkpoint
recommended switch bank settings.
Base Model Checkpoint Recommended Switch Bank Settings
MS2321 SW1 & SW2 switches 1 and 6 set to ON
MS2322 SW1 & SW2 switches 1 and 6 set to ON
All StratosH models have a connector labeled EAS In on the bottom of the unit. Honeywell has an optional EAS cable
(PN 52-52511x) available for purchase for connection between the Checkpoint device and the StratosH.
Figure 26. EAS Cable Connection (Bottom of StratosH)
The following figure shows the location of the EAS deactivation area for the StratosH. It is important to pass the entire tag through this
area to deactivate the security tag.
Figure 27. EAS Deactivation Area