Filter
Top Products
14
Scale Protocols
The following bar codes will change scale parameters intended for a Dual Cable
environment. To place the scanner in Dual Cable mode, please refer to
page 23.
The MS2xx0 must be in scale program mode to use these bar codes.
Scale = NCI-ECR Protocol
³ 9 9 6 0 1 5
Set the scale RS232 protocol to NCI-ECR.
Communication Port Settings:
• 9600 Baud
• 8 Data Bits
• 1 Stop Bit
• No Parity
Scale = NCI Protocol
³ 9 9 6 0 1 6
Reserved for Future NCI Protocol Variation