16
COM Port Settings (Baud Rate)
The following bar codes will change scale parameters intended for a Dual Cable
environment.
If a Scale Protocol bar code from page 13 or 15 is used, the bar codes below
must be scanned after the Scale Protocol bar code in order to be effective.
The MS2xx0 must be in scale program mode to use these bar codes.
Scale = 2400 Baud Rate
³ 9 9 6 0 1 7
Set the scale baud rate for dual cable
applications to 2400 baud.
Scale = 9600 Baud Rate
³ 9 9 6 0 1 8
Set the scale baud rate for dual cable
applications to 9600 baud.