Filter
Top Products
60
Quick Start for a Secondary Honeywell Scanner
The following codes do not require that the MS2xx0 to be in scale program
mode.
Step 1
Use the Stratos to scan the following bar codes. These bar codes will
configure the Stratos’ auxiliary port to accept a Honeywell scanner as the
secondary scanner.
Enable Stratos Auxiliary Port
³ 4 3 7 3 2 0
Aux 8 Data Bits
³ 1 3 7 2 1 3
Note: The auxiliary input port’s data format must match the main output format
of the secondary scanner