Filter
Top Products
20
COM Port Settings (Data Bits & Parity)
The following bar codes will change scale parameters intended for a Dual Cable
environment.
If a Scale Protocol bar code from page 13 or 15 is used, the bar codes below
must be scanned after the Scale Protocol bar code in order to be effective.
The MS2xx0 must be in scale program mode to use these bar codes.
Scale = Even Parity
³ 9 9 6 0 2 5
Set the scale communication to even parity.
Scale = No Parity
³ 9 9 6 0 2 6
Set the scale communication to no parity.