Filter
Top Products
14
Manual Activation
Decodes ALL 1D, PDF and 2D matrix codes
Scanning Method:
1. Press the button one time to activate linear targeting.
2. Align the linear targeting line over the desired bar code.
Note: When scanning 1D programming bar codes, the bar code must
be presented to the scanner in the correct orientation, see
Figure 12. PDF and 2D matrix codes may be presented in any
orientation.
Figure 12. 1D Programming Bar Code Orientation
3. Press the button a second time to decode and send the data.
4. The unit will return to the default presentation mode either by the default
time length or by double clicking the button.
Note: Decoding and functional capability of the unit is restricted through the use
of license numbers provided by Honeywell. Units will not support key
features such as, but not limited to, the ability to decode PDF, 2D or OCR
fonts without the proper licenses. Desired licenses can be specified at the
time of sale or call a customer service representative for more information.
Standard models ship with the ability to read all 1D, PDF and 2D bar
codes. OCR fonts are disabled by default and must be specifically
requested at an additional cost.
Scanner configuration bar codes require the manual activation mode.
2D matrix bar code types are not enabled by default in the manual activation mode.
Refer to the Area-Imaging Supplemental Configuration Guide (see page 2) for
additional information on enabling code types.